Hydraulic equipment catalogue

No end of solutions for fluid conveyance

Our products overflow with top technology

Thanks to working partnerships with major organisations, we offer a complete range of hydraulic and fluid power components, intelligently integrated and 100% tested.

Hydraulic hoses
Discover range
Press fittings
Discover range
BSP Adapters
Discover range
DIN 24° Adapters
Discover range
JIC 37° Adapters
Discover range
ORFS Adapters
Discover range
Accessories
Discover range

HYDRAULIC HOSES

Wide range of flexible rubber and thermoplastic hoses for the transfer of solid, liquid, gaseous, and even corrosive chemical substances. Specific solutions for low and high pressures and temperatures.

Available categories:

  • Braided hoses: Rubber hoses with one or two steel braids, used in numerous hydraulic applications. Safety, flexibility, and reliability have made them a benchmark wherever power transmission through hydraulic oil is required. The range meets high-pressure resistance requirements while combining excellent flexibility and compact dimensions;
  • Spiral hoses: Range of hoses with spiral steel reinforcement (for very high pressures); also available are special spiral hoses designed to deliver performance above standard in terms of abrasion resistance, extremely high pressures, high temperatures, weather resistance, as well as compactness and flexibility;
  • Cleaner hoses: Rubber hoses with one or two steel braids. Used in descaling and cleaning systems with ultra-high-pressure water. Safety factor 2.5:1;
  • Thermoplastic and PTFE hoses: Hoses for medium and high pressures, with operating temperatures from -70°C to +260°C, available as single or twin hoses. Main features: low weight and bulk, excellent resistance to fatigue, bending, and vibrations, minimal pressure loss, and very long service life;
  • Textile hoses: Low-pressure hoses with textile reinforcement for delivery and suction.

 

PRESS FITTINGS

Complete range of press fittings for hydraulic flexible hoses, compliant with ISO 12151 and SAE J516 standards. All items are made from automatic steel (11SMnPb37) and, where required, are heat-treated and protected with an electro-galvanic process.

Available in STANDARD, INTERLOCK, and HYPERSPIRAL series.

 

DIN 24° ADAPTERS

The series of adapters compliant with ISO 8434-1/DIN 2353 standards allows for a mechanical connection using a cutting ring. This enables the rapid assembly of easily removable pipes, avoiding welding, threading, and flaring operations, greatly simplifying the construction of complex hydraulic systems.

During tightening, the ring deforms according to the 24° cone bore of the fitting and penetrates the steel tube, creating two incisions and ensuring both leak-tightness and anti-pullout of the ring from the tube, as well as insensitivity to vibrations and pressure spikes. This ensures greater safety under extreme operating conditions.

 

BSP ADAPTERS

Series of adapters with mechanical coupling, made on a 60° conical seat.

All fittings are made of steel (11SMPb37), produced partly from drawn bars and partly from forging. These products ensure leak-free performance (even with gases), good resistance to high tightening torques, easy assembly, and the possibility of repeated assembly and disassembly. This series is suitable for high pressures.

 

ORFS ADAPTERS

Adapters used for high-pressure fluid connections, where sealing is achieved not only by the thread but also by a flat surface with a seat for an O-Ring (made of nitrile compound, suitable for temperatures from -20°C to +120°C), ensuring absolute leak-tightness.

These products offer high resistance to vacuum and high pressures and tightening torques, ensure leak-free performance (even with gases), and are easy to assemble, with the possibility of repeated assembly and disassembly by replacing the O-Ring if necessary due to wear or aging.

 

JIC 37° ADAPTERS

Recommended for high-pressure hydraulic connections as they guarantee perfect system sealing. By following the various standards and usage recommendations (maximum working pressure, tightening torque), fittings in this range can easily withstand stresses from vibrations or sudden changes in working pressure.

The range is designed for use with working pressures up to 350 bar.

These products ensure leak-free performance (even with gases), good resistance to high tightening torques, easy assembly, and the possibility of repeated assembly and disassembly. This series is suitable for high pressures.

 

ACCESSORIES

Wide selection of accessories including:

  • quick couplings;
  • high-pressure valves;
  • protective spirals;
  • clamps and bands.
Certificates and technical documents
How to order
Request a quote